Product Details
Product Details
| Heavy industrial machine bed: Heavy duty bed,High strength carbon steel sheet with low thermal,stable and significant wear resistance. Technology borrowed from leading European manufacturers production of Mortise-and-Tenon Joint beds. All seams in the manufacture of the frame are welded on both sides,no residual stresses in welded elements, high reliability to vibration, shock, dynamic and temperature loads. Modular desktop design completely eliminates thermal deformations that can occur from heating during intensive work of the laser. |
Fully pneumatic chuck： The chuck is a 245 full-stroke pneumatic chuck with a built-in cylinder, which is easy to install. The side air intake realizes the clamping and loosening actions. It can clamp the full range of applicable pipes and the full stroke to improve production efficiency. The four-claw guide uses a guide rail mechanism to drive the four-claw linearity and stability, achieving a self-centering effect. There is no need to adjust the position of the four-claw additionally, which greatly reduces the labor cost of adjusting the machine, improves production efficiency, and has better stability and wear resistance. |
|
| Laser Head： BOCI BLT series cutting head is a cost-effective intelligent cutting head. It is not only small in size and light in weight, but also has multiple sets of intelligent sensors integrated inside the cutting head, real-time closed-loop intelligent monitoring, rapid diagnosis and timely warning. It has anti-collision protection function, which can quickly recover after collision, simplify the maintenance process and reduce maintenance costs. Protective mirror temperature detection, real-time monitoring of the protective mirror temperature during cutting, when the protective mirror is contaminated, the system will stop the light and alarm in time, effectively reducing the poor cutting caused by protective mirror contamination Standard air pressure sensor, more precise gas control, more stable cross-section quality; open air protection to avoid lens explosion; one-button intelligent calibration of air pressure, more convenient and worry-free replacement of nozzles/processes. |
Control system: Cypcut 3000 system is a professional cutting software for processing various types of pipes. It is perfectly connected with the nesting software Tubest, which realizes the nesting, common edge, basic process and special process processing of parts. After exporting the processing file, you can directly use TubePro for cutting. It has an error measurement function. By comparing the command trajectory with the feedback trajectory, it is convenient for the debugging personnel to judge the difference in the servo gain of each spindle, so as to ensure the motor motion accuracy and the actual accuracy of the workpiece. Special steel centering supports L steel, channel steel, I-beam and other special steel centering to improve the cutting accuracy of special steel. |
|
Technical Parameters
Technical Parameters
| Model | GX-6024T | GX-6080T |
| Laser Power | 1000W/1500W/2000W/3000W,ect | 1000W/1500W/2000W/3000W,ect |
| Working Size | 6000mm | 6000mm*80mm diameter |
| Positioning Accuracy | ±0.03mm | ±0.03mm |
| Repositioning Accuracy | ±0.02mm | ±0.02mm |
| Max Acceleration | 1.2G | 1.2G |
| Max Movement Speed | 60m/min | 120m/min |
Get a Quote
Regardless of whether you require general advice or specific support, we are happy to help you.
