Fiber laser welding machine is a laser welding equipment which uses high energy laser to weld workpiece. For the parts that are difficult to be welded, flexible transmission non-contact welding is implemented, which has greater flexibility.
Laser welding machine is divided into single pendulum welding and double pendulum welding.
Single pendulum: it is used to increase the forming width of single welding seam during welding, mainly for wide welds, such as groove welds and fillet welds. Because when the weld is wider, if the welding gun does not swing, the forming width of the single welding seam is relatively narrow, and there will be defects of the middle high and low on both sides of the weld. In order to solve this problem, it is necessary to make the welding gun swing regularly along the width of the weld.
Double pendulum: two swing motors are built in Double swing welding has advantages in thin plate welding with thickness less than 1mm. But it breaks easily, almost three months,or every six months, high failure rate.
Single swing welding technology is relatively simple, low failure rate. The current market share of single welding is about 80%.
Combined with market feedback, GX Laser Company's 1500W and 2000W welding machines adopt single swing structure, with low failure rate and good customer feedback.
https://www.gxlasercnc.com/products/gx-hws-hand-held-fiber-laser-welding-machine
Customer Experiences Shine with Our CO2 Laser Cutters
The Benefits of Integrating a CO2 Laser Engraving Machine into Your Workflow
Advantages Of GONXING Laser Cleaning Machines In Metal Cleaning
